Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why West Covina Homeowners Choose CGI Construction
We provide independent CGI service in West Covina, and what sets our CGI work apart is knowing this cabinet line from the inside out: RTA cam-lock boxes, thermofoil door faces, particleboard shelving, and the finish catalog that came with the builder and remodel installs in this valley. We are an independent service provider working with licensed local kitchen and bath professionals. We are not affiliated with, authorized by, or a dealer for CGI or Masco Cabinetry. If your West Covina kitchen has CGI cabinets that are swelling, peeling, or working loose, call (844) 320-3099 to schedule a free estimate. We answer 24/7.
Why Trust Construction West Covina for Your CGI Construction?
Our technicians have up to 10 years of experience with cabinetry of this kind, and that time gets spent in the details CGI owners actually live with. Cam and dowel joints that back off after years of door swing. Particleboard that swells under a sink nobody noticed leaking. A thermofoil edge that starts lifting near the range. We look for the cause instead of quoting a full replacement off the first symptom.
We repair, install and service CGI cabinets with quality parts that fit them. That means OEM CGI doors, drawer boxes, hinges and shelves sourced through the dealer channel when a single box or door is being matched, and quality aftermarket hinges, slides and cabinet-leveling parts where they hold up better than the original hardware. We don’t claim to stock genuine CGI parts on hand. We find what fits your cabinets and your budget.
Warranty-safe practice matters here. Cutting into a box, drilling a new hinge pattern, or swapping hardware in a way that changes the load on the cabinet can affect coverage on that component. We work around what’s still under warranty and tell you plainly when a repair puts that at risk. One contractor from the curb to the kitchen means the cabinets, counters, backsplash and island all get planned together, not pieced out to four trades.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Fix in West Covina
CGI cabinets fail in predictable places. Each one has a cause, and naming it is half the fix.
- RTA cam-lock and dowel joints loosening at the box. Ready-to-assemble cabinets carry load through cam fittings and dowels. After years of door swing and dishes coming in and out, those joints work loose and the box racks slightly. Left alone, the doors stop meeting the frame square and the whole run feels off.
- Particleboard or MDF boxes swelling around the sink and dishwasher. A slow leak from a supply line, a worn disposal seal, or condensation inside the cabinet feeds moisture into the box edge. Particleboard drinks it and swells. Once the panel has swollen, sanding it back rarely restores a flat surface, so we check the extend of the damage before recommending a repair.
- Thermofoil or laminate door faces peeling at the edges. The doors nearest the range and hood take heat plus grease plus steam. That combination breaks down the adhesive behind the thermofoil, the edge curls, and moisture gets underneath. It’s an environment problem, not a defective cabinet line.
- RTA drawer boxes with cracked plastic corner connectors. Heavy pots and stacked cans load the drawer box at the corners. Plastic connectors crack or pull out, the box racks, and the drawer drags. Metal replacement corners and quality slides usually solve it without a new drawer box.
- Frameless Euro-style boxes out of square after a floor or wall change. Euro-style cabinets hang on the wall and sit on the floor with no face frame to hide a shift. When a floor is leveled, tile goes down, or a wall is opened for a remodel, the cabinet run shifts and the doors gap. Re-hanging and shimming brings them back into line.
CGI Parts & Our Repair-vs-Replace Approach
We match parts to the cabinet, not the other way around. For a single damaged door or drawer box, we source OEM CGI components through the dealer channel so the door profile, finish and hinge pattern line up with the rest of the run. For hinges, slides and leveling legs, we choose quality aftermarket parts where they’re stronger than the originals. We don’t stock OEM or genuine CGI parts.
The repair-or-replace call comes down to how far the damage spreads. One swollen box behind a dishwasher is a repair. Three or four swollen boxes plus peeling doors plus a layout that no longer fits how you cook is a sign that replacement or refacing will cost less than chasing parts across a failing run. We’d rather tell you that than sell you a repair that won’t hold.
A kitchen with CGI cabinets in service for years often shows its age at the sink and the doors first. A slow leak swells the particleboard box, or a thermofoil door edge starts peeling near the range. The usual cause is moisture at the box and heat plus wear at the door faces, not the cabinet line itself. A qualified local pro inspects the box for swelling, checks the cam and hinge hardware, and either replaces the affected box and door or, when the failures are widespread, proposes a refacing or full cabinet replacement plan before ordering counters. That order matters here. Counters get cut to the cabinet run you’re keeping. Call (844) 320-3099 for a free estimate and we’ll tell you which path your West Covina kitchen needs.
Our CGI Service Process – Step by Step
- 1
Diagnosis. We open the boxes, check for swelling along the bottom and side panels, test the cam fittings, and look at hinge and slide wear. We photograph what we find so you can see the cause, not just hear it.
- 2
Repair or install plan. For repairs, we identify the exact OEM CGI door, drawer box or shelf needed and match finish and profile. For installations, we plan the run around the wall and floor conditions in your West Covina home, then set the layout before any counter gets templated.
- 3
Test. Doors get checked for alignment and swing, drawers for smooth travel under load, and the sink cabinet for moisture after the supply lines are reconnected. A cabinet that only looks right when it’s empty isn’t done.
- 4
Warranty and handoff. We note which components are still under manufacturer coverage and which are ours to stand behind. You get a written line-item estimate first, with the price fixed to the job so nothing changes mid-project.
See the difference
Before
After
Before
After
Before
AfterCGI Products We Service & Install in West Covina
CGI makes cabinet and refacing products, and that’s where our work on this brand lives. We service and install CGI Ready-to-Assemble cabinetry lines, Premier cabinet collections, Euro-style frameless cabinets, and CGI bath vanity cabinets. That covers kitchen runs, bath vanities, and the refacing work that updates door and drawer faces without tearing out the boxes. We repair and install within that catalog using quality parts that fit it. We’re an independent service provider and not a CGI dealer, so on a full replacement we’ll walk you through the brand options that suit your budget and layout. Within our kitchen and bath scope we also work with KraftMaid, Cambria, Silestone and Kohler when a project calls for them.
We Also Service These Brands
Construction West Covina is a multi-brand contractor, not a single-line dependent. Alongside CGI, our kitchen and bath work draws on KraftMaid and Wellborn cabinets, Cambria, Silestone and Caesarstone quartz, and Kohler and Toto fixtures. Broad brand access means you choose the material and we make it work for your West Covina home.
FAQs – CGI Construction Service in West Covina
No. We are an independent service provider and we are not affiliated with, authorized by, or a dealer for CGI or Masco Cabinetry. We repair, install and service CGI cabinets with quality parts that fit them. Call (844) 320-3099 for a free estimate.
Yes, often you can. If the boxes are sound and only the door faces are peeling or damaged, replacing the doors and drawer fronts restores the look without tearing out the run. We source OEM CGI doors through the dealer channel so the finish and profile match. If the boxes are swollen or the layout fails you, a reface or full replacement is the better call. Call (844) 320-3099 to talk through which fits your West Covina kitchen.
Moisture is almost always the cause. A slow supply-line leak, a worn disposal seal, or condensation inside the cabinet feeds water into the particleboard or MDF box edge, and it swells. The fix starts with stopping the leak, then deciding whether the box can be dried and repaired or needs replacement. Call (844) 320-3099 and we’ll take a look.
It’s common, not normal. Ready-to-assemble cabinets carry load through cam-lock and dowel joints, and over years of door swing and daily use those fittings can back off and the box can rack. Tightening and reinforcing the joints often solves it. If the box has cracked or swollen, replacement of that box is the sound fix.
Not necessarily, but OEM CGI doors, drawer boxes and shelves usually come through the dealer channel, and that’s the path to a proper finish and profile match. We help you identify what fits so you’re not guessing at hinge patterns or door styles. Call (844) 320-3099 for help figuring out the right part.
Reface if the boxes are solid and the layout works for you; replace if several boxes are swollen, the doors are failing across the run, or the layout no longer fits how you cook. The order matters: counters get templated to the cabinets you keep, so decide cabinet scope first. Cabinet installation runs $4,000 – $13,000, countertop installation $2,000 – $6,500, backsplash $800 – $2,500, and a kitchen island $3,000 – $10,000. A full kitchen remodel in West Covina typically runs $14,000 – $45,000, and a small kitchen remodel $9,000 – $20,000. These are estimated ranges and the written estimate sets the final price. Call (844) 320-3099 for an exact quote.
Book Your CGI Service in West Covina, CA
Whether it’s one swollen box, a set of peeling CGI doors, or a full cabinet and counter plan, we can help. Call (844) 320-3099 to schedule your free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday. One contractor from the curb to the kitchen.
Written by the team at Construction West Covina.